Update to Commodity Code Structure to maintain dynamic alignment with the EU: The following commodity codes have been created as of 20 December 2024:
The following commodity codes have ended as of 31 December 2024:
- 2002904110
- 2002904190
- 2002904910
- 2002904990
The following commodity codes have been created as of 1 January 2025:
| Commodity Code | Description |
|---|---|
| 2002904120 | With a dry matter content of more than 30 % by weight |
| 2002904920 | With a dry matter content of more than 30 % by weight |
| 2818101120 | Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1) and magnesium aluminate (CAS RN 12068-51-8), with a content by weight (calculated as oxides) of: -92 % or more of aluminium oxide, and -8 % or less of magnesium oxide |
| 2906190070 | (1S,2S,3R,5S)-(+)-2,3-Pinanediol (CAS RN 18680-27-8) with a purity by weight of 98 % or more |
| 2914290065 | 3-Methylcyclopent-2-enone (CAS RN 2758-18-1) with a purity by weight of 98 % or more |
| 2917198065 | 20-tert-butoxy-20-oxoicosanoic acid (CAS RN 683239-16-9) with a purity by weight of 98 % or more |
| 2917198075 | Ethylene brassylate (CAS RN 105-95-3) with a purity by weight of 97 % or more |
| 2918999073 | Methyl (2R)-2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) with a purity by weight of 97 % or more |
| 2920907035 | Triisopropyl borate (CAS RN 5419-55-6) with a purity by weight of 99 % or more |
| 2922498563 | Glycine hydrochloride (CAS RN 6000-43-7) with a purity by weight of 95 % or more, whether or not containing not more than 5 % of anti-caking agent silicon dioxide (CAS RN 112926-00-8), used to produce food flavourings |
| 2923900013 | Bis(N,N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6) with a purity by weight of 95 % or more, whether or not in aqueous solution containing 20 % or more Bis(N,N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6) |
| 2924190020 | Tert-butyl N-methyl-N-(2-oxopropyl)carbamate (CAS RN 532410-39-2) with a purity by weight of 90 % or more |
| 2924190025 | Methylcarbamate (CAS RN 598-55-0) with a purity by weight of 98 % or more |
| 2924297039 | N-[(9H-Fluoren-9-ylmethoxy)carbonyl]glycine (CAS RN 29022-11-5) with a purity by weight of 99 % or more |
| 2924297041 | (2S)-6-amino-2-({[(9H-fluoren-9-yl)methoxy]carbonyl}amino)hexanoic acid hydrochloride (CAS RN 139262-23-0) with a purity by weight of 90 % or more |
| 2924297042 | N-Benzyloxycarbonylglycine (CAS RN 1138-80-3) with a purity by weight of 99 % or more |
| 2924297057 | 2-(Dimethylaminomethylidene)-4-methoxy-3-oxo-N-[(2,4,6-trifluorophenyl)methyl]butanamide (CAS RN 1846582-17-9) with a purity by weight of 95 % or more |
| 2925199550 | 2-{2-[2-(1,3-Dioxo-2,3-dihydro-1H-isoindol-2-yl)ethoxy]ethoxy}acetic acid (CAS RN 75001-09-1) with a purity by weight of 95 % or more |
| 2928009063 | Daminozide (ISO) (CAS RN 1596-84-5) with a purity by weight of 97 % or more |
| 2929909070 | N’,N’’-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) in the form of an aqueous solution containing by weight 70 % or more but not more than 95 % of N’,N’’-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) |
| 2930909582 | Propane-1,3-dithiol (CAS RN 109-80-8) with a purity by weight of 98 % or more |
| 2932140020 | 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) with a purity by weight of 98 % or more |
| 2933399944 | Fluroxypyr-meptyl (CAS RN 81406-37-3) with a purity by weight of 95 % or more |
| 2933399945 | 2,4-Dichloropyridine-3-carboxaldehyde (CAS RN 134031-24-6) with a purity by weight of 95 % or more |
| 2933399951 | 2-Amino-3-bromo-5-nitropyridine (CAS RN 15862-31-4) with a purity by weight of 98 % or more |
| 2933399954 | 2,5-Dichloro-4,6-dimethylpyridine-3-carbonitrile (CAS RN 91591-63-8) with a purity by weight of 99 % or more |
| 2933399972 | N-[(1S,5R)-8-Benzyl-8-azabicyclo[3.2.1]octane-3-yl]-2-methylpropanamide (CAS RN 376348-67-3) with a purity by weight of 98 % or more |
| 2933599561 | 4-Methyl-7H-pyrrolo[2,3-d]pyrimidine (CAS RN 945950-37-8) with a purity by weight of 98 % or more |
| 2933599564 | Thiopental (INNM) (CAS RN 76-75-5) with a purity by weight of 98 % or more |
| 2933599566 | Piperazin-2-one (CAS RN 5625-67-2) with a purity by weight of 96 % or more |
| 2933698043 | 4-(4,6-Bis((biphenyl-4-yl)-1,3,5-triazine-2-yl)-1,3-benzodiole (CAS RN 182918-16-7) with a purity by weight of 96 % or more |
| 2933998049 | Tert-butyl (2S)-2-carbamoylpyrrolidine-1-carboxylate (CAS RN 35150-07-3) with a purity by weight of 97 % or more |
| 2933998050 | Tert-butyl (3R)-3-aminopyrrolidine-1-carboxylate (CAS RN 147081-49-0) with a purity by weight of 97 % or more |
| 2933998051 | (1R,5R)-Ethyl 3-benzyl-3-azabicyclo[3.1.0]hexane-1-carboxylate hydrochloride (CAS RN 2914217-81-3) with a purity by weight of 97 % or more |
| 2933998052 | (S)-2-Methylpyrrolidine-2-carboxylic acid hydrochloride (CAS RN 1508261-86-6) with a purity by weight of 98 % or more |
| 2934208035 | 3-Methyl-1,2-benzothiazole-1,1-dioxide (CAS RN 34989-82-7) with a purity by weight of 95 % or more |
| 2934999019 | (4R,6S)-6-Methyl-7,7-dioxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-4-ol (CAS RN 147128-77-6) with a purity by weight of 94 % or more |
| 2934999031 | Thenoic acid (CAS RN 1918-77-0) with a purity by weight of 97 % or more |
| 2934999032 | Error: Unable to fetch data |
| 3206200050 | Nickel iron chromite black spinel (C.I. pigment black 30) (CAS RN 71631-15-7) |
| 3206200060 | Cobalt chromite green spinel (C.I. pigment green 26) (CAS RN 68187-49-5) |
| 3206200070 | Copper chromite black spinel (C.I. pigment black 28) (CAS RN 68186-91-4) |
| 3402901015 | Silicone surfactant consisting of a mixture of: -60 % or more but not more than 85 % by weight of Polyalkyleneoxidedimethylsiloxane copolymer (CAS RN 68937-55-3), -15 % or more but not more than 40 % by weight of poly(oxy-1,2-ethanediyl),α-hydro-ω-hydroxy-Ethane-1,2-diol, ethoxylated (CAS RN 25322-68-3), -0,8 % or more but not more than 1,5 % by weight Octamethylcyclotetrasiloxane (CAS RN 556-67-2), -0,6 % or more but not more than 1,0 % by weight Decamethylcyclopentasiloxane (CAS RN 541-02-6), -0,2 % or more but not more than 0,5 % by weight Dodecamethylcyclohexasiloxane(CAS RN 540-97-6) |
| 3808939070 | Preparation in the form of powder, containing by weight 90 % or more of gibberellin A4 and gibberellin A7 combined (CAS RN 8030-53-3) |
| 3811290033 | Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used in the manufacture of blends of additives for lubricating oils |
| 3815199055 | Components for a catalyst system, imported as single components or as set, made up of at least one of the following preparations: -ceramic material (CAS RN 66402-68-4), -molybdenum oxide and nickel oxide supported on aluminium oxide, -molybdenum oxide, nickel oxide and aluminium phosphate supported on aluminium oxide, -molybdenum oxide, nickel oxide, aluminium phosphate, silica, and molybdenum supported on aluminium oxide, for use against organic and inorganic impurities in kerosene production |
| 3824999244 | Mixture, containing by weight: -90 % or more but not more than 95 % of cresol ethoxylate (CAS RN 37281-57-5), and -5 % or more but not more than 10 % of xylenol ethoxylate (CAS RN 61723-82-8) |
| 3824999331 | Reaction mass of dihexadecyl hydrogen phosphate (CAS RN 2197-63-9) and hexadecyl dihydrogen phosphate (CAS RN 3539-43-3) |
| 3901300020 | Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8) -containing by weight 28 % or more but not more than 49 % of vinyl acetate, -with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238), -in the form of pellets |
| 3901300030 | Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5) |
| 3901908075 | Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets |
| 3901908085 | Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets |
| 3919908056 | Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm |
| 4408399510 | Iroko sheets for veneering for plywood panels: -with a largest dimension of 900 mm or more, but not more than 3 250 mm, -with a smallest dimension of 95 mm or more but not more than 2 000 mm, -with a thickness of more than 1 mm, but not more than 4 mm, -unsanded, -not planed, and -sawn, sliced or peeled lengthwise |
| 4408399520 | Igaganga sheets for veneering for plywood panels: -with a largest dimension of 900 mm or more, but not more than 3 250 mm, -with a smallest dimension of 95 mm or more but not more than 2 000 mm, -with a thickness of more than 1 mm, but not more than 4 mm, -unsanded, -not planed, and -sawn, sliced or peeled lengthwise |
| 4408399530 | Ozigo sheets for veneering for plywood panels: -with a largest dimension of 900 mm or more, but not more than 3 250 mm, -with a smallest dimension of 95 mm or more but not more than 2 000 mm, -with a thickness of more than 1 mm, but not more than 4 mm, -unsanded, -not planed, and -sawn, sliced or peeled lengthwise |
| 4408399590 | Other |
| 8407338020 | New, single-cylinder, four stroke, spark-ignition internal combustion engine with: -a cylinder capacity exceeding 500cm³ but not exceeding 1000 cm³, -overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm (height), -a power of 22 kW or more but not more than 35 kW, -equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (+/- 1 degree), -whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector, for use in the manufacture of all-terrain or utility task vehicles |
| 8407338030 | New, twin-cylinder, four-stroke, spark-ignition internal combustion engine with: -a cylinder capacity exceeding 500 cm³ but not exceeding 1000 cm³, -overall dimensions of not more than: 470 mm (length) x 450 mm (width) x 600 mm (height), -a power of 40 kW or more but not more than 86 kW, -whether or not equipped with overhead camshaft, starter motor, spark plug wires, fuel rail and injectors, for use in the manufacture of all-terrain or utility task vehicles |
| 8407349110 | New dual cylinder, four stroke internal combustion spark-ignition engine with: -a cylinder capacity exceeding 1000 cm³ but not exceeding 1250 cm³, -overall dimensions of not more than: 700 mm (length) x 430 mm (width) x 610 mm (height), -a power of 60 kW or more but not more than 110 kW, -whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes |
| 8407349910 | New dual cylinder, air cooled, four stroke 49 degree V-twin internal combustion spark-ignition engine with: -a cylinder capacity exceeding 1800 cm³, -overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm (height), -a power of 60 kW or more but not more than 75kW, -equipped with a dry sump system with an intermediate wet receptacle, -whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes |
| 8409990035 | The exhaust gas recirculation assembly consisting of: -a control unit, -an air throttle, -an intake pipe, -an outlet hose, for use in the manufacture of compression-ignition combustion engines of motor vehicles |
| 8414900035 | Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with: -a width of 115 mm or more but not more than 160 mm, -a length of 115 mm or more but not more than 170 mm, -a height of 30 mm or more but not more than 100 mm, -a piece of pressure branch with pipe connection, -one or two mounting holes and -more than one overflowing hole |
| 8419508030 | Aluminium heat exchanger for gas boilers designed for heat transfer: -with a height of 100 mm or more, but not more than 120 mm, -with a width of 235 mm, but not more than 280 mm, -with a lenght of 250 mm or more, but not more than 280 mm, -for a power output of 25 kW or more, but not more than 35 kW, -with a weight of 8 kg or more, but not more than 10 kg |
| 8481809980 | Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: -in metal cover, -with electrical connector, -with a force of not more than 10 N, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a length of 80 mm or more but not more than 110 mm, -with a width of 80 mm or more but not more than 110 mm, -with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles |
| 8483109540 | Stepped shaft made of carbon steel with: -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5’ but not more than 0° 21,5’, -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg |
| 8503009873 | Pressure die-cast electric motor stator housing: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a height of 70 mm or more but not more than 76 mm, -with a width of 155 mm or more but not more than 162 mm, -with a weight of 330 g or more but not more than 360 g |
| 8536419060 | Power relay with the function of safely connecting or disconnecting the charging and/or power circuit of 48V batteries in a plastic housing, containing: -current sensor 50A/400V, -high voltage MILD fuse 70V/300A, -whether or not cable with connector, for use in the production of rechargeable batteries for hybrid and electric vehicles |
| 9503009530 | Miniature engine: -consisting of a plastic body, -containing a spring, -providing movement of gear shafts with spring tension, for use in the manufacture of the toys under heading 9503 |
| 9503009540 | Miniature engine driven by mechanical friction: -consisting of a plastic body, -with shaft length 10,5 cm or more but not more than 14,5 cm, -containing a metal disc, -creating movement by causing the gears to rotate with the friction force, for use in the manufacture of the toys under heading 9503 |
The following commodity codes have been absorbed as of 1 January 2025:
- 2002904110 is being absorbed into 2002908010
- 2002904110 is being absorbed into 2002904120
- 2002904190 is being absorbed into 2002904120
- 2002904910 is being absorbed into 2002908010
- 2002904910 is being absorbed into 2002904920
- 2002904990 is being absorbed into 2002904920
Update to Tariff Preference Measures for Canada:
This update is due to the Department for Business and Trade correcting their tariff dataset entry in respect of Tariff Preference measures (measure type 142) and Preferential tariff quota measures (measure type 143). Measures applicable to Canada have been updated from 2025. For further information, please see the Canada Preferential Tariff Reference Document.
More information
To stop getting the Tariff stop press notices, or to add recipients to the distribution list, email: tariff.management@hmrc.gov.uk.